Solar prices in Melbourne by system size
Installed prices are before rebates. The federal STC rebate is worked out at Melbourne's own STC zone (zone 4, postcode 3000) and comes off at the point of sale.
| System | Panels | Installed, before rebates | Federal STC rebate | After STC rebate |
|---|---|---|---|---|
| 6.6 kW | about 15 | $6,900-$9,200 | 39 STCs, about $1,546 | $5,354-$7,654 |
| 10 kW | about 23 | $10,500-$13,900 | 59 STCs, about $2,339 | $8,161-$11,561 |
| 13.2 kW | about 30 | $13,900-$18,300 | 78 STCs, about $3,093 | $10,807-$15,207 |
STCs valued at $39.65 each, the price used across this site, verified 10 October 2026. Zone from the Clean Energy Regulator's postcode zone table. Panel counts assume the 440 W panels the size pages use. How the installed bands are built is on solar panel installation cost.
What a fair Melbourne quote looks like
We don't sell packages or specials, so there is no Melbourne deal to advertise here. The low end of each band is budget panels and a budget inverter; the high end is premium brands and more complex roofs. A quote well under the low end usually leaves something out, such as a switchboard upgrade, tile work, network fees or a smaller inverter. Ask for every item in writing, with the STC rebate shown as its own line, using the solar quote checklist.
Is the solar rebate dropping in 2027?
Yes. The STC rebate is calculated from deeming years, which fall from 5 to 4 on 1 January 2027. A 6.6 kW system in Melbourne earns 39 certificates (about $1,546) if it is installed in 2026, and 31 certificates (about $1,229) from 1 January 2027: about $317 less at today's certificate price. The federal battery discount also steps down on 1 January 2027; see the Cheaper Home Batteries page for the schedule.
What's different about solar in Melbourne
Melbourne sits in the STC zone with the lowest rating, so the same system earns fewer certificates than it would in Sydney or Brisbane. Solar Victoria's panel rebate and its matching interest-free loan can bring the price down further, but both are means-tested: owner-occupiers only, under a household income cap, with no solar installed at the address in the last 10 years. Victoria has no state battery rebate.
Melbourne solar rebates: the full VIC stack
Every program, its status and the government source is on the Victoria rebate page. On a Melbourne install:
- Federal STC rebate: about $1,546 on a 6.6 kW system in zone 4, applied at the point of sale.
- Federal Cheaper Home Batteries Program: about $3,608 on a 13.5 kWh battery, if you add storage.
- Solar Homes, Solar Panel (PV) Rebate: Up to $1,400 + matching $1,400 interest-free loan.
- Solar Homes, Hot Water Rebate: Up to $1,400 (locally-made products) / $1,000 (other).
Adding storage? The Victoria battery rebate page works through every battery size.
Solar companies registered near Melbourne
51 solar companies have an Australian Business Register address near Melbourne. Public record only, no ratings or rankings: the five longest-registered are below.
| Company | ABN status | Years trading |
|---|---|---|
| Essential Solar | Active | 25 yrs |
| Solar Link Australia | Active | 20 yrs |
| Evergreen Solar Power | Active | 18 yrs |
| Green Solar | Active | 18 yrs |
| Green Solar Energy | Active | 18 yrs |
See all 51 solar companies in Melbourne, or skip the research and get matched with one vetted installer.
Feed-in tariffs in Melbourne
The three highest generally available flat feed-in offers in VIC, from the AER plan data retrieved 29 October 2026. Offers that need a battery, a VPP or a particular installer are left out.
| Retailer | Plan | Feed-in tariff |
|---|---|---|
| EnergyAustralia | Solar Max - Time of Use with Controlled Load | 8c/kWh for the first 10 kWh a day, then 1.5c |
| ENGIE | VIC ENGIE - Solar Elec | 8c/kWh for the first 8 kWh a day, then 1c |
| Origin Energy | Origin Solar Boost - Oct'26 (Time of Use with Dedicated Circuit) | 5c/kWh for the first 8 kWh a day, then 1c |
Feed-in tariff data: Based on AER data, Consumer Data Right Energy Product Reference Data (Energy Made Easy and Victorian Energy Compare), retrieved 2026-10-29. Source: AER © Commonwealth of Australia. Not endorsed by the AER. Rates in c/kWh as published by retailers; no GST added.
Every retailer's rate is on the Victoria feed-in tariff comparison.
See your Melbourne rebate amount
We'll match you with one SAA-accredited installer who works Melbourne.
How to get a Melbourne solar quote
- Take the 30-second eligibility check (postcode, bill, and whether you already have solar).
- Hear from your specialist within 24 to 48 hours.
- Get matched with one SAA-accredited installer who works your suburb.
- Get a fixed-price quote with every rebate applied at the invoice.
- Install, usually 4 to 6 weeks after you sign.
Common questions about solar in Melbourne
How much do solar panels cost in Melbourne?
A 6.6 kW system in Melbourne costs about $6,900-$9,200 installed, before rebates. The federal STC rebate takes about $1,546 off (39 certificates at $39.65 in STC zone 4), leaving $5,354-$7,654. Eligible households can also claim the Solar Homes Solar Panel (PV) Rebate of up to $1,400, which has income and property conditions. Figures verified 10 October 2026.
Which solar installer is best in Melbourne?
There is no single best installer in Melbourne, and we do not rank them. We match you with one installer that works your postcode, after checking its ABN and its Solar Accreditation Australia (SAA) accreditation. Our Melbourne directory lists the 51 solar companies registered nearby, with ABN status and years trading and no scores.
Are solar rebates dropping in 2027?
Yes. The STC rebate is based on deeming years, which fall from 5 to 4 on 1 January 2027. A 6.6 kW system in Melbourne earns 39 certificates if installed in 2026 and 31 from 1 January 2027, about $317 less at today's certificate price. The federal battery discount also steps down on 1 January 2027.
How long does solar installation take in Melbourne?
The install itself is usually one day on site. From signing the quote, expect around 4 to 6 weeks, most of it waiting for the network operator's connection approval and the installer's schedule. Ask for both dates on the quote.
What's the best feed-in tariff in Melbourne?
In the AER plan data retrieved 29 October 2026, the highest generally available flat offer in VIC was EnergyAustralia at 8c/kWh for the first 10 kWh a day, then 1.5c. Rates change often, and the best plan depends on what you pay for the power you import, so compare the whole plan, not just the feed-in rate.
Is 10 kW solar enough to run a house?
In total energy, usually: a 10 kW system produces about 40 kWh on an average day (national average; Melbourne averages about 3.9 peak sun hours a day). Compare that with the daily usage on your power bill. The gap is timing: panels produce in the middle of the day, so without a battery you still buy power in the evening.
Do solar panels work well in Melbourne's climate?
Yes. Melbourne averages about 3.9 peak sun hours a day. Output scales with sun hours, so the same system produces less in a lower-sun city, but the STC rebate is set by your postcode's zone rating, not by what the system actually produces.
Solar panels in other cities
Sydney , Brisbane , Perth , Adelaide , Canberra , Hobart , Darwin , Newcastle , Wollongong , Gold Coast , Geelong , Cairns , Sunshine Coast , Townsville , Central Coast , Toowoomba .